Clack Birm Filter Media for Iron & Manganese Removal

Birm is a granular filter media for the reduction of dissolved iron and manganese compounds from raw water supplies. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds.
  • Iron removal efficiency is extremely high
  • Durable material with a long life and wide temperature range
Origin: U.S.A
Product Code: 2009
Brand: Clack
Availability: In Stock
Download Produt Details

Birm Filter Media
Rs. 10,350 Rs. 11,500
You save Rs. 1,150 (10% Off)
Shipping & Delivery
Free Shipping (All over Pakistan)
Birm® is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. Birm, acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++ to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Birm provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods.

Other advantages of Birm include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Birm does not require chemicals for regeneration, only periodic backwashing is required.

Clack Birm may also be used for manganese reduction with the same dependability as iron removal. In these applications the water to be treated should have a pH of 8.0-9.0 for best results. If the water also contains iron, the pH should be below 8.5. High pH conditions may cause the formulation of colloidal iron which is very difficult to filter out. All other conditions remain the same for either manganese or iron removal.

Specifications of Clack Birm Filter Media for Iron & Manganese Removal

Physical Characteristics
Bulk Density 36-38 lbs/ft³
Specific Gravity 2.0 gm/cc
Mesh Size 10 x 50